Here is a Android All In One PC Factory talking about the ways to maintain industrial monitors.

Industrial PC Monitor is like the computer we usually use, it needs regular maintenance, maintenance also needs skill, maintenance of industrial display, teach you to get it!

Industrial PC Monitor

1. Avoid the internal burnout of the screen

When not in use for a long time, the display should be turned off, or the display brightness of the display should be lowered. Otherwise, the long-time high-brightness display may easily lead to internal burnout or aging. If such damage occurs, it is necessary to perform "big surgery" to recover. In addition, if a fixed content is continuously displayed for a long time, it may cause the LCD pixels to overheat, resulting in unavoidable loss.

2. Pay attention to maintain humidity

Industrial displays with a normal humidity of 30% to 80% can work normally, but once the indoor humidity is higher than 80%, the inside of the display is prone to condensation. The internal power transformer and other coils are also prone to leakage after being damp, and may even cause short-circuiting of the connection; and the high-voltage part of the display is prone to discharge; the internal components are prone to rust and corrosion, and the circuit is severe when it is severe. The board is shorted. Therefore, the display must be protected against moisture, and the display that is not used for a long time can be energized for a period of time, so that the heat generated by the display can drive out the moisture inside the machine. Also, don't let any moisturey things get inside the monitor. Found foggy, wipe it off with a soft cloth to turn on the power. If the moisture has entered the display, it must be placed in a stable, high place to allow the moisture and organics to evaporate. Applying power to an LCD containing humidity can cause corrosion of the liquid crystal electrode and cause permanent damage. The pH of the Apache industrial display is maintained at 10% to 95%.

3. Correctly clean the display surface

If you find that the surface of the display is smudged, gently wipe it off with a soft cloth dampened with water. Do not spray water directly onto the surface of the display. Water entering the LCD will cause a short circuit. First make sure the LCD is off. .

The methods to clean the screen are:

1. Wipe the screen with a clean, soft, lint-free cloth to remove dust and other particles.

2. If it is dirty, pour a small amount of nitrogen-free, non-alcoholic glass cleaner onto the cloth and wipe it.

The method of cleaning the chassis is the same as above.

3. Avoid shocks

The LCD screen is very fragile, so avoid strong shock and vibration, and the LCD contains a lot of glass components, falling to the floor or other similar strong impact will cause damage to the LCD screen and other units, while paying attention to the LCD The display surface is pressurized.

4. Do not disassemble the machine

Even after a long period of shutdown, the CFL inverter in the backlight unit may still have a high voltage of about 1000V, which may cause personal injury, so never attempt to disassemble or change the LCD display. Unauthorized repairs and changes will result in the display not working, so contact your professional for repairs.

We have Industrial Android Tablet PC. If you need any information about the product, welcome to contact us.